Neodymium Block Magnet - 10mm x 6mm x 1mm | N50
Same Day Dispatch
Order before 1pm to qualify for same day dispatch.
Neodymium Block Magnets
This neodymium block magnet has a length of 10mm, width of 6mm and a height of 1mm. Its grade is M50 which gives it a pull force of 571 grams and a maximum operating temperature of 80 degrees celsius. This magnetic block is nickel coated. The nickel coating protects the neo block and gives it a silver magnet look which makes it quite contemporary in appearance.
Bar magnets and rectangular magnets are alternative names for these neodymium block magnets. They come in a variety of sizes and grades. Neodymium rare earth magnets are about seven times stronger than other types of magnets of a similar size.
These permanent magnets have a variety of uses. They are used by woodworkers and cabinet makers as they are easily incorporated into designs to provide a smooth finish. People who create handicrafts also find this magnetic product very useful.
Typical Physical Properties
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
Production Flow Diagram
Demagnetization Curves
Surface Treatment
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Range and Tolerance
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Magnetic Properties
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Returns Policy
If you are not entirely satisfied with your purchase, we're here to help.
We have a 30 Day Returns policy at Frenergy Magnets. You may return your item within 30 days of receiving it to receive a refund.
The product/s must be unused and in the same condition you received them in. Please contact us at info@frenergy.com.au to initiate the returns process.
The buyer is responsible for the cost of returning the order.
