Neodymium Block Magnet - 4mm x 3mm x 1.8mm | N50
Same Day Dispatch
Order before 1pm to qualify for same day dispatch.
N50 Neodymium Block Magnet 4mm x 3mm x 1.8mm – Nickel Coated
Small in size but impressive in magnetic performance, this N50 Neodymium Block Magnet delivers strong magnetic force in an ultra-compact design. Its low-profile 1.8mm height and sleek nickel coating make it a versatile choice for applications where space is limited and a discreet magnetic fixing is required.
Manufactured from high-grade Neodymium Rare Earth magnetic material, this tiny block magnet offers excellent magnetic strength relative to its size. With a stated pull force of 0.5050kg and a surface field strength of 6,698 Gauss, it is suited to precision applications across electronics, model-making, fashion and jewellery design.
The magnet is magnetised through its height, meaning its North and South poles are located on the two opposing 1.8mm faces.
Common Applications
-
Fashion and jewellery: Incorporate discreet magnetic closures and fastening solutions into jewellery and accessories.
-
Model-making: Secure small components and create compact magnetic connections.
-
Electronics: Use in suitable electronic assemblies and compact devices.
-
Sensors and motorised devices: Incorporate into precision components and specialised equipment.
-
Medical equipment: Suitable for applications where a small, powerful magnetic component is required, subject to the equipment manufacturer's specifications.
-
Craft and DIY projects: Create low-profile magnetic attachments where space is restricted.
Key Features
-
High-strength N50 Neodymium Rare Earth magnet.
-
Compact block shape with an ultra-low 1.8mm profile.
-
Nickel coating for a smooth metallic finish.
-
Strong magnetic performance relative to its small size.
-
Magnetised through the height.
-
Suitable for precision, electronic, craft and model-making applications.
Technical Specifications
| Specification | Details |
|---|---|
| Magnet type | Neodymium block magnet |
| Grade | N50 |
| Length | 4mm |
| Width | 3mm |
| Height | 1.8mm |
| Coating | Nickel |
| Pull force | 0.5050kg |
| Surface field strength | 6,698 Gauss |
| Direction of magnetisation | Through height (1.8mm) |
Important Product Information
The stated pull force is a test-condition value and should not be considered a guaranteed working load. Actual holding force will vary depending on the thickness and type of steel, contact surface, air gap, alignment and direction of applied force.
Nickel coating provides a smooth protective finish, but it can chip or wear if the magnet is struck or handled roughly. Neodymium magnets are brittle and may fracture on impact.
Handling and Safety
Despite its small size, this is a powerful Rare Earth magnet. Keep small magnets away from children and pets, as swallowing magnets can cause serious internal injuries. Keep magnets away from magnetic-sensitive equipment and medical devices.
Typical Physical Properties
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
Production Flow Diagram
Demagnetization Curves
Surface Treatment
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Range and Tolerance
Magnets are readily available in Blocks, Discs, Cylinders & Rings. We specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Magnetic Properties
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Returns Policy
If you are not entirely satisfied with your purchase, we're here to help.
We have a 30 Day Returns policy at Frenergy Magnets. You may return your item within 30 days of receiving it to receive a refund.
The product/s must be unused and in the same condition you received them in. Please contact us at info@frenergy.com.au to initiate the returns process.
The buyer is responsible for the cost of returning the order.