Neodymium Block Magnet - 6.35mm x 6.35mm x 38.1mm | N52
Same Day Dispatch
Order before 1pm to qualify for same day dispatch.
Neodymium Block Magnets
Square and Rectangular Neodymium magnets have large flat poles that bond strongly to metal surfaces. Unlike cylindrical magnets, they do not easily fit into drilled holes in material such as timber or plastic. Metal shelving, cabinets, motor vehicles and industrial sites are all environments where steel surfaces are commonplace and can benefit from convenient and strong magnetic attachment. In the case of non-metallic materials, Neodymium Block magnets are more easily attached by applying glue to one of the large North or South pole areas Neodymium products exert extremely strong magnetic energy which means less conspicuous, smaller magnets can be used to perform the same tasks as larger, more cumbersome Ceramic magnets. This rare-earth block contains maximum strength N52 Grade Neodymium and has a corrosion-resistant Nickel coating to protect it from harsh atmospheric conditions.
Typical Physical Properties
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
Production Flow Diagram
Demagnetization Curves
Surface Treatment
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Range and Tolerance
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Magnetic Properties
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Returns Policy
If you are not entirely satisfied with your purchase, we're here to help.
We have a 30 Day Returns policy at Frenergy Magnets. You may return your item within 30 days of receiving it to receive a refund.
The product/s must be unused and in the same condition you received them in. Please contact us at info@frenergy.com.au to initiate the returns process.
The buyer is responsible for the cost of returning the order.
