Neodymium Block Magnet 10x5x4mm N38
Product code: 22047
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Block Magnet 10x5x4mm N38
Neodymium Block Magnets
This neodymium magnetic block has a length of 10mm, width of 5mm and a height of 4mm. It has a magnetic flux reading of 4589 Gauss and a pull force of 1.6 kilos. It is nickel coated which gives it a shiny, contemporary appearance and also supports resistance to scratching and corrosion. Its magnetic properties include a maximum operating temperature of 80 degrees celsius.
This type of permanent magnetic block comes in a variety of sizes and grades which lends itself to many uses. It is commonly used as an attachment and securing mechanism. It can be glued or drilled into place or fitted into chiselled woodwork so it works as a fastener or latch to close doors. People working on do it yourself projects and craft activities incorporate magnetic blocks in their creations. Magnetic products such as these are used in mechanisms in the industrial world.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Neodymium Block Magnets
This neodymium magnetic block has a length of 10mm, width of 5mm and a height of 4mm. It has a magnetic flux reading of 4589 Gauss and a pull force of 1.6 kilos. It is nickel coated which gives it a shiny, contemporary appearance and also supports resistance to scratching and corrosion. Its magnetic properties include a maximum operating temperature of 80 degrees celsius.
This type of permanent magnetic block comes in a variety of sizes and grades which lends itself to many uses. It is commonly used as an attachment and securing mechanism. It can be glued or drilled into place or fitted into chiselled woodwork so it works as a fastener or latch to close doors. People working on do it yourself projects and craft activities incorporate magnetic blocks in their creations. Magnetic products such as these are used in mechanisms in the industrial world.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
