Product code: B-W10H5L30-N35
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Block Magnets
Neodymium magnets are the strongest of all permanent magnets. Their intense strength has led to many technological advancements, not only because of their powerful holding ability but also because of their permanent nature and extremely high power to weight ratio. Neodymium Block magnets are suited to holding materials onto flat steel surfaces and are also responsible for the generation of rotational movement inside electric motors where they react to alternating electric currents. Electric motors vary greatly in both size and use and are important for powering many of the mechanical operations in Mining, Agriculture, Manufacturing and Resource Management. For practical use at home or work, a small amount of Epoxy glue on the back of the magnet allows it to be attached to any type of surface. Square and rectangular shaped Neodymium magnets are often used as components in other apparatus where they sit inside a frame or bracket to protect the magnet from damage. They can then be used to attract and collect harmful metal waste from factory and workshop floors.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Neodymium Block Magnets
Neodymium magnets are the strongest of all permanent magnets. Their intense strength has led to many technological advancements, not only because of their powerful holding ability but also because of their permanent nature and extremely high power to weight ratio. Neodymium Block magnets are suited to holding materials onto flat steel surfaces and are also responsible for the generation of rotational movement inside electric motors where they react to alternating electric currents. Electric motors vary greatly in both size and use and are important for powering many of the mechanical operations in Mining, Agriculture, Manufacturing and Resource Management. For practical use at home or work, a small amount of Epoxy glue on the back of the magnet allows it to be attached to any type of surface. Square and rectangular shaped Neodymium magnets are often used as components in other apparatus where they sit inside a frame or bracket to protect the magnet from damage. They can then be used to attract and collect harmful metal waste from factory and workshop floors.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
The Pull Force listed for each magnet is based on lifting 10mm thick steel vertically. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around 30% of the pull force listed due to the effects of gravity and the lack of traction between the surface and the shiny magnet.
