Reviewed by Peter L.
Verified Buyer
I recommend this product
Radio Control model
Just what we needed thankyou.
Loading...
Was this helpful?
Neodymium Block Magnet 5x5x5mm N45
Product code: B-W5H5L5-N45
$0.86buy 10 to 100 itemsand
save 24%
$0.75buy 101+ itemsand
save 34%
Total
$1.14
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Block Magnet 5x5x5mm N45
Rated 5.0 out of 5
Product Code
B-W5H5L5-N45
Pull Force*
1.22kg
Weight
15gr
Coating
Nickel
Gauss
5972
Grade
N45
Direction of Magnetisation
Axially (Through Height)
Dimensions
Width:5mm, height:5mm, Length:5mm
*Measured against up to 10mm mild steel.
Neodymium Block Magnet
With a holding force of 1.94kg this petite 5 x 5 x 5mm cube magnet packs an astounding power into its small form. The diminutive size of these magnets means they are amazingly adaptable, they can be used as a singular magnet or in an infinite array of different combinations to suit the dimensions needed for your application. N45 is one of the top magnetic grades, making these a superior quality magnet to that sold by many of our competitors in the same dimensions.
Rare Earth Neodymium magnets are the world’s strongest permanent magnets and are the ideal magnet if you require maximum magnetic strength. They are up to seven times stronger that Ferrite magnets and come in a huge range of sizes, shapes and grades. Rare Earth magnets are magnetically stable and have a strong resistance to demagnetization however they are not suitable for use in high temperature applications.
Due to their greater strength to size ratio, Neodymium magnets have now replaced alnico and ferrites in many engineering and mechanical industries. Being smaller and lighter than traditional magnets they are ideal for applications such as, bearings, speakers and headphones, hard disks, wind turbines and electric cars to name just a few.
There have also been a range of new applications that particularly make use of the reduced size, magnetic jewelry and magnetic kids toys are two such areas.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Neodymium Block Magnet
With a holding force of 1.94kg this petite 5 x 5 x 5mm cube magnet packs an astounding power into its small form. The diminutive size of these magnets means they are amazingly adaptable, they can be used as a singular magnet or in an infinite array of different combinations to suit the dimensions needed for your application. N45 is one of the top magnetic grades, making these a superior quality magnet to that sold by many of our competitors in the same dimensions.
Rare Earth Neodymium magnets are the world’s strongest permanent magnets and are the ideal magnet if you require maximum magnetic strength. They are up to seven times stronger that Ferrite magnets and come in a huge range of sizes, shapes and grades. Rare Earth magnets are magnetically stable and have a strong resistance to demagnetization however they are not suitable for use in high temperature applications.
Due to their greater strength to size ratio, Neodymium magnets have now replaced alnico and ferrites in many engineering and mechanical industries. Being smaller and lighter than traditional magnets they are ideal for applications such as, bearings, speakers and headphones, hard disks, wind turbines and electric cars to name just a few.
There have also been a range of new applications that particularly make use of the reduced size, magnetic jewelry and magnetic kids toys are two such areas.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
