Reviewed by JASON D.
Verified Buyer
I recommend this product
Happy customer
Nice
Loading...
Was this helpful?
Neodymium Cylinder Magnet 6mm x 6mm N38
Product code: 21045
$0.79buy 10 to 49 itemsand
save 12%
$0.69buy 50+ itemsand
save 23%
Total
$0.90
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Cylinder Magnet 6mm x 6mm N38
Rated 5.0 out of 5
Product Code
21045
Pull Force*
1.21kg
Weight
0.01kg
Gauss
5633
Dimensions
Height:6.00mm
*Measured against up to 10mm mild steel.
Neodymium Cylinder Magnets
Diameter: 6mm
Height: 6mm
Grade: N38
Coating: Nickel (Ni)
Magnetized Direction: Through height - 6mm
Theoretical Holding Force: ~1.211 kgs
Surface Gauss: 5633 Gauss
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Neodymium Cylinder Magnets
Diameter: 6mm
Height: 6mm
Grade: N38
Coating: Nickel (Ni)
Magnetized Direction: Through height - 6mm
Theoretical Holding Force: ~1.211 kgs
Surface Gauss: 5633 Gauss
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
