Skip to content
FREE SHIPPING AUSTRALIA WIDE
FREE SHIPPING AUSTRALIA WIDE

Country

Neodymium Disc Magnet 8mm x 2mm N35

SKU D-D8H2-N35
Pull Force: 734 g
Original price $1.37 - Original price $1.37
Original price
$1.37
$1.37 - $1.37
Current price $1.37
$1.37 AUD for 1 to 9 items
$1.09 AUD buy 10 to 99 items and save 20%
$0.92 AUD buy 100+ items and save 33%
Availability:
in stock, ready to be shipped

Same Day Dispatch

Order before 1pm to qualify for same day dispatch.

Product code: D-D8H2-N35
Pull Force* 734 g
Weight 10 g
Gauss 2705
Grade N35
Coating Nickel (NiCuNi)
Direction of Magnetisation Through Height
Dimensions Height:2mm, Outside Diameter:8mm
*Measured against up to 10mm mild steel.

Neodymium Disc Magnets

Once a few small, round rare earth discs have been glued onto a surface or material, that material or product can be suspended from ferrous surfaces permanently or on a convenient as-needed basis. Many applications for magnetic attachment occur in factories, industrial landscapes, agricultural settings, mine sites and in environments where motor vehicles, trucks or machinery are regularly in use. Warning signs, lighting, electrical cabling and small hand tools are also able to be suspended magnetically with small round magnets like this N35 Grade Neodymium disc. Screws and other more conventional penetrating fasteners reduce the structural integrity of the steel surfaces they bind to which can lead to water and dust ingress and can cause costly corrosion issues over time. Magnetic attachment is a user-friendly and completely non-invasive form of attachment that can be used in commercial environments or at home. The permanent and consistent power of rare earth Disc magnets has led them to be a common component in audio equipment, electric motors and telecommunications tools including the ever-present smartphone.

Typical Physical Properties

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

Production Flow Diagram
Demagnetization Curves
Surface Treatment

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Range and Tolerance

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Magnetic Properties

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

Returns Policy

If you are not entirely satisfied with your purchase, we're here to help.

We have a 30 Day Returns policy at Frenergy Magnets. You may return your item within 30 days of receiving it to receive a refund.

The product/s must be unused and in the same condition you received them in. Please contact us at info@frenergy.com.au to initiate the returns process.

The buyer is responsible for the cost of returning the order.

Request a quote
Free Shipping

When you spend $100+

Give Us A Call

+1 (201) 555-5555

Chat With Us

We offer 24-hour chat support

Locations

Find a store near you