Skip to content
FREE SHIPPING AUSTRALIA WIDE
FREE SHIPPING AUSTRALIA WIDE

Country

Neodymium Ring Magnet OD10mm x H1.5mm | Hole 5mm N42

SKU R-OD10H1.5ID5
Pull Force: 794 g
Original price $3.69 - Original price $3.69
Original price
$3.69
$3.69 - $3.69
Current price $3.69
$3.69 AUD for 1 to 9 items
$3.29 AUD buy 10 to 99 items and save 11%
$2.75 AUD buy 100+ items and save 25%
Availability:
in stock, ready to be shipped

Same Day Dispatch

Order before 1pm to qualify for same day dispatch.

Product code: R-OD10H1.5ID5
Pull Force* 794 g
Weight 0.01kg
Gauss 0
Grade N45
Coating Nickel (NiCuNi)
Direction of Magnetisation Through Height
Dimensions Width:9.53mm, Length:25.40mm, Height:1.50mm, Outside Diameter:10.00mm, Inside Diameter:5.00mm
*Measured against up to 10mm mild steel.

Neodymium Ring Magnets

Outside Diameter: 10mm (0.393" in.)
Height: 1.5mm (0.059" in.)
Inside Diameter: 5mm (0.197" in.)
Grade: N42
Coating: Nickel (Ni)
Magnetized Direction: Through height - 1.5mm

Neodymium Ring magnets are used in many modern-day products and appliances. Permanent magnets and their magnetic fields can be used to operate electronic devices and sound and communications equipment. Other uses include computers, smartphones, televisions, speakers and electric motors. 

Ring-shaped magnets are sometimes applied to pipes that contain fluid to descale or modify the passing contents. In less commercial environments, Neodymium ring magnets make handy hanging or attachment mechanisms for garments and coverings.

The hole in the strong magnet ring makes it easy to secure in place with wire, string or sewing thread. Ring magnets are sometimes paired with a steel washer to form a closure system on each side of an opening. Small Neodymium ring magnets are also popular with scale model makers and those who want to add a magnetic aspect to their crafts and hobbies.

Typical Physical Properties

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

Production Flow Diagram
Demagnetization Curves
Surface Treatment

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Range and Tolerance

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Magnetic Properties

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

Returns Policy

If you are not entirely satisfied with your purchase, we're here to help.

We have a 30 Day Returns policy at Frenergy Magnets. You may return your item within 30 days of receiving it to receive a refund.

The product/s must be unused and in the same condition you received them in. Please contact us at info@frenergy.com.au to initiate the returns process.

The buyer is responsible for the cost of returning the order.

Request a quote
Free Shipping

When you spend $100+

Give Us A Call

+1 (201) 555-5555

Chat With Us

We offer 24-hour chat support

Locations

Find a store near you