Reviewed by john l.
Verified Buyer
I recommend this product
great little magnet
These magnets work so much better than the disappointing useless ones that I recently returned to Bunnings.
Loading...
Was this helpful?
Neodymium Countersunk Ring Magnet - OD12.5mm x 6mm C/hole d3/d9 | NORTH
Product code: 23012
$2.91buy 10 to 99 itemsand
save 12%
$2.51buy 100+ itemsand
save 24%
Total
$3.32
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
Neodymium Countersunk Ring Magnet - OD12.5mm x 6mm C/hole d3/d9 | NORTH
Rated 5.0 out of 5
Product Code
23012
Pull Force*
3.9kg
Weight
0.01kg
Grade
N38
Coating
Nickel (NiCuNi)
Direction of Magnetisation
Through Height | North on C/S face
Dimensions
Height:6mm, Outside Diameter:12.5mm, Inside Diameter:3/9mm
*Measured against up to 10mm mild steel.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Based on 1 review
100%
of reviewers would recommend this product to a friend
Customer photos and videos
1 Review
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Based on 1 review
100%
of reviewers would recommend this product to a friend
Customer photos and videos
1 Review
Reviewed by john l.
Verified Buyer
I recommend this product
great little magnet
These magnets work so much better than the disappointing useless ones that I recently returned to Bunnings.
Loading...
Was this helpful?
